Xerox 604P18057 manual Changing the Default Time Settings, Sleep Mode

2 Product Overview

Sleep Mode

The machine automatically switches to the Sleep Mode after the Low Power Mode continues for a certain period of time. The Sleep Mode has a reduced power consumption compared to Low Power Mode. In this mode, the touch screen is turned off, and the Power Saver light is on. The Sleep Mode is cancelled when the <Power Saver> button is pressed, or a fax or print job is received by the machine. The factory default setting of 15 minutes is customer changeable within the range of 2 to 60 minutes. The time specified for entering the Sleep Mode will be counted from when the machine enters the Low Power Mode.

For more information, refer to Auto Power Saver in the Setups chapter on page 192.

NOTE: By default, the machine skips the Low Power Mode and switches directly to the Sleep Mode after 15 minutes of inactivity.

Changing the Default Time Settings

This section describes how to change the default time settings using the Key Operator access. If you need assistance or more information, contact the Key Operator or refer to Machine Clock/Timers in the Setups chapter on page 191.

1.Press the <Log In/Out> button on the control panel.

<Log In/Out> button

2.Enter the Key Operator ID using the numeric keypad on the control panel. Select [Confirm] on the [System Administrator Login] screen.

NOTE: The default Key Operator ID is “11111”. If the Authentication feature is enabled, you may be required to enter a password. The default password is “x-admin”. The password is case sensitive.

40 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide