Xerox 604P18057 manual Bypass Tray Tray

Loading Paper

6.Set the machine to detect the paper size automatically, or manually specify the required size. For more information, refer to Paper Size in the Setups chapter on page 195.

NOTE: Paper sizes detected by the machine vary depending on the Key Operator setting. For more information, refer to Paper Size Settings in the Setups chapter on page 201.

Bypass Tray (Tray 5)

The bypass tray allows you to use a variety of paper types. The bypass tray is located on the left-hand side of the machine. A tray extension is provided to accommodate larger sized paper. After loading paper stock in the bypass tray, make sure that the bypass tray settings on the touch screen match the paper size and type of the stock loaded. If they do not match, reprogramming is required. For more information on programming of the bypass tray, refer to [Tray 5 (Bypass)] Screen in the Copy chapter on page 52.

NOTE: To reduce unnecessary fuser and paper jams, it is important that the programmed paper size and type is identical to the paper stock loaded.

1. Load the paper neatly into the bypass tray, making sure that the paper stock is in the center of the tray.

NOTE: Do not load paper above the maximum fill line.

NOTE: When making single/double sided copies on perforated paper,

load the paper to feed the opposite side of the perforated edge first. Feeding the perforated edge first might cause paper jams.

NOTE: When making copies or prints on thick-stock paper and the paper will not feed into the machine, apply a curl to the paper as shown in the illustration on the right. Note however, that excessively bending or folding the paper might cause paper jams.

NOTE: When loading envelopes, make sure the flaps are closed and that the envelopes are oriented on the tray so that the flaps will enter the machine first. However, when loading C5-size envelopes, set the long edge feed so that the edge with the flaps is facing towards you.

2. Slide the side guides towards the paper until they are just touching the edge of the stock.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 183