Xerox 604P18057 Audio Tones, Control Panel Select Tone, Control Panel Alert Tone, Fault Tone

Common Settings

Audio Tones

Use this feature to select the volume level of tones to be generated at various occasions. You can choose different volume levels for each item shown on the screen.

1.Select [Audio Tones] on the [Common Settings] screen.

2.Use the scroll buttons to switch between screens.

3.Perform the necessary operations.

4.Select [Close].

Control Panel Select Tone

Select the volume level of the tone generated when an appropriate button on the control panel is pressed and its action is accepted.

Control Panel Alert Tone

Select the volume level of the tone generated when an inappropriate button on the control panel is pressed.

Machine Ready Tone

Select the volume level of the tone generated when the machine becomes ready to copy or print, for example, after the power is switched on.

Copy Job Complete Tone

Select the volume level of the tone generated when copying finishes successfully.

Non-Copy Job Complete Tone

Select the volume level of the tone generated when a job other than copying finishes successfully.

Fault Tone

Select the volume level of the tone generated when a job did not finish properly.

Alert Tone

Select the volume level of the tone generated when a job is suspended due to an error.

Out of Paper Warning Tone

Select the volume level of the tone generated when the machine runs out of paper.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 193