Xerox 604P18057 manual Auto Eject Time, Adobe Communication Protocol, Bi-directional Communication

Network Settings

Print Mode

Specify the PDL (Page Description Language) to be used for print jobs. Only pre- installed PDLs are available.

PJL

Specify whether to enable the PJL (Printer Job Language).

Auto Eject Time

Specify the time-out period when print data is not sent to the machine sequentially. If the specified time elapses, the remaining data inside the machine is automatically printed out. You can specify a time within the range of 5–1,275 seconds in 5-second increments.

Adobe Communication Protocol

Specify the communication protocol format for Adobe Communication Protocol.

•Standard – Select this option when the communication protocol is in the ASCII format.

•Binary – Select this option when the communication protocol is in the binary format. Depending on the data, the print job may be completed faster than [Standard].

•TBCP – (Tagged Binary Communications Protocol) Select this option to switch the specific control codes when the communication protocols involve both ASCII and binary formats.

Bi-directional Communication

Select whether to enable the bi-directional communication.

Input Prime

Select whether to enable the input prime. If enabled, the reset processing is triggered by the input prime signal received.

USB

Use this feature to specify whether to enable the USB port and to configure the relative parameter settings.

Port Status

Specify whether to enable the USB port.

Print Mode

Specify the PDL to be used for print jobs. Only pre-installed PDLs are available.

PJL

Specify whether to enable the PJL (Printer Job Language).

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 213