Xerox 604P18057 manual Copy Control, Output Destination, Annotation - Stamp Position

11 Setups

Output Destination

Sets the default tray for output. If the machine is equipped with the finisher, select [Center Output Tray] or [Finisher Tray].

NOTE: Before using the Center Output Tray, it must be enabled through the Extended Tray Module setting. Refer to Extended Tray Module on page 200.

NOTE: When the staple function is used, the output tray changes to [Finisher Tray] automatically.

Annotation - Stamp Position

Sets the default for [Position] of [Stamp] in the [Annotation] feature on the [Output Format] screen.

Annotation - Date Position

Sets the default for [Position] of [Date] in the [Annotation] feature on the [Output Format] screen.

Annotation - Page Number Style

Sets the default for [Style] of [Page Number] in the [Annotation] feature on the [Output Format] screen.

Annotation - Page Number Position

Sets the default for [Position] of [Page Number] in the [Annotation] feature on the [Output Format] screen.

Copy Control

Use this feature to implement operational control of the various copy features. The [Copy Control] screen consists of multiple pages.

1.Select [Copy Control] on the [Copy Mode Settings] screen.

2.Use the scroll buttons to switch between screens.

3.Perform the necessary operations.

4.Select [Close].

Memory Full Procedure

If the hard disk becomes full while reading documents, a message asking how to process the data read up to that point is displayed. You can predefine a processing method to be performed after the message has been displayed for a specified period. If you select [Cancel Job], the data will be discarded. If you select [Run Job], the data read up to that point will be processed.

208 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide