Xerox 604P18057 manual Specifying Destinations, Stop the Fax/Internet Fax Job

Specifying Destinations

Stop the Fax/Internet Fax Job

Follow the steps below to manually cancel an activated fax/Internet Fax job.

1.Select [Stop] on the touch screen or press the <Stop> button on the control panel to suspend the fax job while the document is being scanned.

2.If required, press the <Job Status> button on the control panel to display the [Job Status] screen. To exit the [Job Status] screen, press the <Features> button.

<Stop> button

<C> button

3.Press the <C> or <Clear All> button on the control panel to delete the suspended fax/Internet Fax job still being scanned. To resume the job, select [Start] on the touch screen or the <Start> button on the control panel.

NOTE: Once the transmission starts, you can stop the job only by selecting [Stop] on the touch screen. You cannot resume the canceled job after the transmission starts.

Specifying Destinations

This section describes how to specify destinations using the features available on the machine. For more information, refer to the following.

Next Recipient – page 82

Address Book – page 82

Speed Dial – page 83

Keyboard – page 83

Relay Broadcast – page 84

Special Characters – page 85

NOTE: You can specify destinations from any tab using the keypad on the control panel, [Speed Dial], and [Next Recipient].

NOTE: You can also specify a combined destination without pressing the [Next Recipient] button, using the keypad on the control panel, [Speed Dial], and [Address Book].

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 81