Xerox 604P18057 Feature, Setting items, Properties, Emulation Settings, 100%, vertical position

	Properties
Feature	Setting items
Emulation Settings	Variable X% – Allows you to specify the X% between 25 to
	100%.
	Up/Down Adjustment – Allows you to specify a value
	between -250 and 250 mm (-9.8–9.8 inches) to adjust the
	vertical position.
	Left/Right Adjustment – Allows you to specify a value
	between -250 and 250 mm (-9.8–9.8 inches) to adjust the
	horizontal position.
	Paper Margin – Allows you to specify a value between 0 and
	99 mm for the paper margin.
	Collated – Allows you to specify whether to collate the output.
	Stapling – Allows you to select the stapling method.
	Image Enhancement – Allows you to enable or disable
	image enhancement.
	Bypass Tray - Wait User – Allows you to specify whether to
	enable or disable this feature when Tray 5 (Bypass) is
	selected.
	PCL
	This page allows you to configure the settings when PCL is
	enabled.
	Paper Tray – Allows you to select the paper tray.
	Output Size – Allows you to select the paper size.
	Paper Size (Bypass) – Allows you to select the paper size for
	Tray 5 (Bypass).
	Output Destination – Allows you to select the destination for
	your output.
	Quantity – Allows you to specify the number of sets to print
	between 1 and 999.
	2 Sided Print – Allows you to select whether to print both
	sides of paper.
	Image Orientation – Allows you to select the image orientation.
	Form Lines – Allows you to specify the page length (printing
	area) of one page.
	Font – Allows you to select the required font from the list of
	fonts available.
	Font Size – Allows you to specify the font size between 4.00
	and 50.00 points in 0.25 point increments.
	Font Pitch – Allows you to specify the font pitch between
	6.00 and 24.00 points in 0.01 point increments.
	Symbol Set – Allows you to select the desired symbol set
	from the list of symbol sets available.
	Handle CR As – Allows you to enable or disable carriage
	return and line feed for the PCL mode.
	Handle LF and FF As – Allows you to enable or disable
	carriage return and line feed, and also carriage return and
	form feed, for the PCL mode.
	HexDump – Allows you to enable or disable hexadecimal
	memory dump for the PCL mode.
	Image Enhancement – Allows you to enable or disable
	image enhancement.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 177