Xerox 604P18057 manual Network Settings, Port Settings, Parallel, Port Status

11 Setups

Network Settings

This screen allows you to change the default settings for the network configuration. There are eight main setup options available. For more information, refer to the following.

NOTE: Items shown in these setting screens may vary depending on a usage environment.

For more information on network setups, refer to the System Administration Guide.

Port Settings – page 212

Protocol Settings – page 215

Machine E-mail Address/Host Name – page 216

POP3 Server Settings – page 217

SMTP Server Settings – page 218

Domain Filter – page 219

Remote Authentication Server Settings – page 219

Other Settings – page 220

1.Select [Network Settings] on the [System Settings] screen.

2.Select the required option.

3.Select [Close].

Port Settings

This feature allows you to set print mode, port status, communication mode, auto eject time for each communication port.

1.Select [Port Settings] on the [Network Settings] screen.

2.Perform the necessary operations.

3.Select [Close].

Parallel

Use this feature to specify whether to enable the parallel port and to configure the relative parameter settings.

Port Status

Specify whether to enable the parallel port.

212 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide