Xerox 604P18057 Scan-to-FTP/SMB Defaults, Scan Size Defaults, Border Erase, Image Compression

11 Setups

Border Erase

Specify the default for erasing black marks that may appear around the edges or at the center binding area of scanned results when scanning bound documents or documents with the platen glass cover open.

Border Erase - Top & Bottom

Specify the default for the top and bottom width to be erased. Select the width in the range from 0 to 50 mm (0 to 2.0 inches).

Border Erase - Left & Right

Specify the default for the left and right width to be erased. Select the width in the range from 0 to 50 mm (0 to 2.0 inches).

Center Erase

Specify the center width to be erased. Select the width in the range from 0 to 50 mm (0 to 2.0 inches) using the scroll buttons or the numeric keypad on the control panel.

Image Compression

Specify the default for compressing scanned data.

Scan-to-FTP/SMB Defaults

Use this feature to configure or change the default settings for scanning and sending documents to specified destinations through the FTP or SMB protocol.

1.Select [Scan-to-FTP/SMB Defaults] on the [Scan Mode Settings] screen.

2.Perform the necessary operations.

3.Select [Close].

Transfer Protocol

Specify the default transfer protocol.

Scan Size Defaults

Use this feature to configure or change the scan size buttons on the [Scan Size] screen displayed under the [Scan Options] tab.

226 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide