Xerox 604P18057 Symptom, Recommendation, Problem Solving, Refer to the Paper and Other Media

16 Problem Solving

Symptom	Recommendation
The Finisher does not stack output correctly.	• Check that the paper tray guides are
	locked into position against the paper.
Pages in the set are not stapled.	• Check that the paper tray guides are
	locked into position against the paper.
Paper delivered to an output tray is not	• Flip over the paper stack in the paper tray,
properly stacked up.	or rotate it head to toe.
Paper curls.	• Check that the paper is loaded correctly.
	Load paper in Trays 1, 2, 3 and 4 seam
	side up.
	• Load paper in the Tandem Tray Module
	and bypass tray seam side down.
	• Load custom media in the bypass tray.
	• Refer to the Paper and Other Media
	chapter for procedures.
Cannot store a document for secure polling	• Cancel the operation and try again later
due to full memory.	when additional memory is available.

328 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide