Xerox 604P18057 Description and Remedy, Fault Codes, 047-213, 047-214, 047-215, Center, tray

	Fault Codes
Code	Description and Remedy
047-213	An error occurred in the finisher. Contact the Xerox Welcome Center.
047-214	An error occurred in the Duplex Module. Contact the Xerox Welcome Center.
047-215	An error occurred in the paper output assembly. Contact the Xerox Welcome
	Center.
047-216	An error occurred in the finisher. Contact the Xerox Welcome Center.
047-218	An error occurred in the Tandem Tray Module. Contact the Xerox Welcome
	Center.
062-211	An error occurred in the document feeder. Contact the Xerox Welcome Center.
063-210
062-277	A communication error occurred between scanning and feeding components of
	the machine. Contact the Xerox Welcome Center.
062-790	The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
	Using the Machine chapter on page 28 and verify the types of documents that
	can be copied.
065-210	An error occurred in the machine. Contact the Xerox Welcome Center.
065-211
065-212
065-213
065-214
071-210	Tray 1 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
071-211	tray.
072-210	Tray 2 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
072-211	tray.
073-210	Tray 3 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
073-211	tray.
074-210	Tray 4 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
074-211	tray.
116-701	Double-sided printing is not possible due to insufficient memory. Add memory.
116-702	Printing was performed using a substitute font. Check the print data.
116-703	An error occurred during PostScript processing. Either confirm the print data, or
	open spool settings on the details tab in the print driver to disable bi-directional
	communication.
116-713	The job was printed out in parts because the hard disk ran out of space. Delete
	unnecessary data.
116-720	An error occurred during printing due to insufficient memory. Close unused ports
	or delete unnecessary data.
116-740	A numerical value operation error occurred because the print data contains a
	value that exceeds the limit of the printer. Check the print data.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 337