Xerox 604P18057 manual Screen Defaults, Low Toner Alert Tone, Line Monitor Volume, Ringing Volume

11 Setups

Low Toner Alert Tone

Select the volume level of the tone generated when it is time to replace the toner cartridge.

Line Monitor Volume

Select the volume level of the tone generated for the line monitor, which allows you to hear call and response signals when connecting to a destination.

Ringing Volume

Select the volume level of the tone generated when a call is received.

Stored Programming Tone

Select the volume level of the tone generated each time operation is performed during job memory registration. You cannot completely turn off the volume for this tone.

Auto Clear Alert Tone

Select the volume level of the tone generated just before the machine performs auto clear.

Base Tone

Select the volume level of the base tone generated when you toggle settings. The machine emits a base tone when it exits the interrupted mode.

Screen Defaults

This feature allows you to customize the initial screen and select the initial language to be displayed on the touch screen.

1.Select [Screen Defaults] on the [Common Settings] screen.

2.Perform the necessary operations.

3.Select [Close].

Screen Default at Power On

Specify the initial screen to be displayed when the machine is switched on. You can change the preset initial screen to the Features, Job Status, or the Machine Status screen. For information on these screens, refer to the Job Status chapter and the Machine Status chapter.

Features Screen Default

Set the features displayed when canceling the Power Saver mode.

194 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide