Xerox 604P18057 manual Scan Mode Settings, Unregistered Forms, Banner Sheet Tray

11 Setups

Unregistered Forms

Sets whether to abort a job which is specified to use form overlay when the form is not found (not registered) in the machine.

Banner Sheet

Sets whether to add sorting sheets (banner sheets). This is effective for sorting/ classifying to differentiate printed sheets from the rest. You can add banner sheets before and/or at the end of the print job.

NOTE: Even if using the Finisher, banner sheets will not be stapled.

Banner Sheet Tray

Specifies a tray for the banner sheets.

PostScript Paper Supply

Sets whether to use the DMS (Deferred Media Selection) feature of PostScript.

PostScript Font Absence

Sets to replace the font automatically and continues the print job when the required font is not found.

NOTE: This feature is available only when PostScript is loaded.

PostScript Font Substitution

Sets whether to use ATCx for font replacement.

NOTE: This feature is available only when PostScript is loaded.

Scan Mode Settings

This screen allows you to configure or change machine settings specific to the scan features. For more information, refer to the following.

Scan Defaults – page 225

Scan-to-FTP/SMB Defaults – page 226

Scan Size Defaults – page 226

Output Size Defaults – page 227

Reduce/Enlarge Presets – page 228

Other Settings – page 228

1.Select [Scan Mode Settings] on the [System Settings] screen.

2.Select the required option.

3.Select [Close].

224 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide