Xerox 604P18057 manual NetWare, EtherTalk, Salutation, Port9100, Snmp, FTP Client, Auto Eject Time

11 Setups

Auto Eject Time

Specify the time-out period when print data is not sent to the machine sequentially. If the specified time elapses, the remaining data inside the machine is automatically printed out. You can enter a time within the range of 5–1,275 seconds in 5-second increments.

Adobe Communication Protocol

Specify the communication protocol format for Adobe Communication Protocol.

•Standard – Select this option when the communication protocol is in the ASCII format.

•Binary – Select this option when the communication protocol is in the binary format. Depending on the data, the print job may be completed faster than [Standard].

•TBCP – Select this option to switch the specific control codes when the communication protocols involve both ASCII and binary formats.

LPD

Use this feature to specify whether to enable the LPD port.

NetWare

Use this feature to specify whether to enable the NetWare port.

SMB

Use this feature to specify whether to enable the SMB port.

IPP

Use this feature to specify whether to enable the IPP port.

EtherTalk

Use this feature to specify whether to enable the EtherTalk port.

Salutation

Use this feature to specify whether to enable the Salutation port. This setting item is available only when the hard disk is installed on the machine.

Port9100

Use this feature to specify whether to enable the Port9100 port.

SNMP

Use this feature to specify whether to enable the SNMP agent.

FTP Client

Use this feature to specify whether to enable the FTP Client port. This setting item is available only when the hard disk is installed on the machine.

214 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide