Xerox 604P18057 manual Feature, Setting items, Properties, Port Status, Port Settings, Ethernet

Properties

Feature	Setting items
Port Status	Port Status
	Allows you to select whether to enable or disable different
	ports used on the machine.
	Parallel – Allows you to select the check box to enable.
	USB – Allows you to select the check box to enable.
	EtherTalk – Allows you to select the check box to enable.
	SMB – Allows you to select check box to enable. You can
	also configure the transport protocol to be used. To enable
	the transport protocol, select the check box of TCP/IP and/or
	NetBEUI.
	NetWare – Allows you to select check box to enable. You
	can also configure the transport protocol to be used. To
	enable the transport protocol, select the check box of IPX/
	SPX and/or TCP/IP.
	LPD – Allows you to select the check box to enable.
	SNMP – Allows you to select the check box to enable. You
	can also configure the transport protocol to be used. To
	enable the transport protocol, select the check box of UDP
	and/or IPX.
	IPP – Allows you to select the check box to enable.
	Port9100 – Allows you to select the check box to enable.
	UPnP – Allows you to select the check box to enable.
	FTP Client – Allows you to select the check box to enable.
	Receive E-mail – Allows you to select the check box to
	enable.
	Send E-mail – Allows you to select the check box to enable.
	Mail Notice Service – Allows you to select the check box to
	enable.
	Internet Services – Allows you to select the check box to
	enable.
	SOAP – Allows you to select the check box to enable.
Port Settings	Ethernet
	Allows you to select the ethernet transmission rate.
	Ethernet Settings – You can select one of the following
	options.
	• Auto: Detects the ethernet transmission rate
	automatically.
	• 10BASE-T(Half Duplex): Selects 10BASE-T (in half duplex)
	as the default value.
	• 10BASE-T(Full Duplex): Selects 10BASE-T (in full duplex)
	as the default value.
	• 100BASE-T(Half Duplex): Selects 100BASE-T (in half
	duplex) as the default value.
	• 100BASE-T(Full Duplex): Selects 100BASE-T (in full
	duplex) as the default value.
	MAC Address – Displays the MAC address of the machine.
	This is a display-only item.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 169