Xerox 604P18057 manual System Administrator Settings, Comments, Paper Type, Tray 1-5 Bypass

11 Setups

NOTE: To delete a registered Address Number in a group, enter the Address Number, and then select [Delete].

Comments

Use this feature to register a comment to be used when attaching a cover note. You can register up to 50 comments; each comment can include up to 18 alphanumeric characters.

1.Select [Comments] on the [Setup Menu] screen.

2.Perform the necessary operations.

3.Select [Close].

Paper Type

Use this feature to set the paper type for each tray.

1.Select [Paper Type] on the [Setup Menu] screen.

2.Perform the necessary operations.

3.Select [Close].

Tray 1–5 (Bypass)

Sets the paper type loaded in each tray.

System Administrator Settings

This feature allows you to customize many settings on the machine to suit your particular requirements. The machine enters the Key Operator mode only when a correct System Administrator Login ID is entered. Before shipment, the default System Administrator Login ID is set to “11111”. The [System Administrator Settings] screen allows you to start procedures for changing the default System Administrator Login ID. For more information, refer to the following.

System Administrator Login ID – page 257

System Administrator Password – page 257

Maximum Login Attempts – page 258

256 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide