How to select a number

Examples:

To select number 5, press 5. To select number 10, press 10. To select number 15, press 10, 1, then 5.

To select number 30, press 10, 3, then 0.

To select number 125, press 10, 10, 1, 2, then 5.

Listening to the Radio INFO

Main Unit

To select the band (FM or AM) To tune in to a station

While FM or AM is selected...

Frequency starts changing on the display.

To select the AM tuner interval spacing

ONLY

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. Before operating the tuner, select the appropriate AM tuner interval spacing used for your area.

1Select “TUNER AM,” then turn off (standby) the System.

2Select the AM tuner interval spacing. To select 9 kHz:

(while holding...)

To select 10 kHz:

(while holding...)

•When you repeatedly press the button, the frequency changes step by step.

To manually stop the search, press either button.

Remote

If the FM reception is poor

ONLY

The M (monaural) indicator lights on the display. Reception will improve though stereo effect is lost— Monaural reception.

To restore the stereo effect, press the button again. The M (monaural) indicator disappears.

To preset the stations

Remote

ONLY

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if it is selected.

2Activate the preset number entry mode.

•Finish the following process while the indication on the display is flashing.

9