~AM/FM antenna

To assemble the AM loop antennaTo connect AM/FM antenna

AM loop antenna (supplied)

Turn it until the best reception is obtained.

If the cords are covered with vinyl, remove the vinyl to expose the tip of the cord by twisting the vinyl.

FM antenna (supplied)

Extend it so that you can obtain the best reception.

For better FM reception

FM outdoor antenna (not supplied)

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector.

ŸSpeakers

•When connecting the speaker cords, match the polarity of the speaker terminals: red to (+) and black to (–)

Press and hold

Insert

Release

 

Red

 

Black

From right

From left

speaker

speaker

•DO NOT connect more than one speaker to each terminal.

•DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.

!Digital audio component

Optical digital

Protective cap

cord (not

supplied)

•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 37).

•The digital signal through the OPTICAL DIGITAL OUT terminal is transmitted only when “DVD/CD” is selected as the source.

5