Recording and Editing Operations (see pages 25 to 28)

•Do not vibrate the System while recording/editing tracks. Take care especially while “WAIT” is shown on the display. It may damage the recorded tracks in the System.

Giving (Editing) Titles to Tracks or Groups:

•When a track is recorded, the track title is given to the track automatically. When you give a title to the track, delete that title first, then enter your desired title.

On-Screen Operations (see pages 29 to 33)On-screen Bar Operations:

•For DVD-VR, “PG” or “PL” appears instead of “TITLE” on the on-screen bar.

Daily Timer Operations (see pages 34 and 35)Setting the Daily Timer:

•If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when the timer is activated.

•When you unplug the power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.

•If you set DVD Video as the source, Daily Timer will not work correctly.

•If you set the Sleep Timer after Daily Timer starts playing the selected source, Daily Timer is canceled.

Setup Menu Operations (see pages 36 and 37)General:

•If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV.

LANGUAGE menu:

•When the language you have selected for “MENU LANGUAGE,” “AUDIO LANGUAGE,” or “SUBTITLE” is not recorded, the original language is used as the initial language.

PICTURE menu—MONITOR TYPE:

•Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size may become 4:3 letter box while playing a disc/file. This depends on how the discs are recorded.

•When you select “16:9 NORMAL/16:9 MULTI NORMAL” or “16:9 AUTO/16:9 MULTI AUTO” for a picture whose aspect ratio is 4:3, the picture changes slightly due to the process of converting the picture width.

OTHERS menu—ON SCREEN GUIDE:

•The setup menu and on-screen bar will be displayed (and recorded) even if this function is set to “OFF.” Subtitles and the information for zoom-in always appear on the display regardless of this setting.

Maintenance

To get the best performance of the System, keep your discs and mechanism clean.

Handling Discs

•Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

•Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

•Be careful not to scratch the surface of the disc when placing it back in its case.

•Avoid exposure to direct sunlight, extreme temperature, and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center to edge.

Cleaning the System

•Stains should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the System may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following:

–DO NOT wipe it with a hard cloth.

–DO NOT wipe it forcefully.

–DO NOT wipe it with thinner or benzine.

–DO NOT apply any volatile substance such as insecticides to it.

–DO NOT allow any rubber or plastic to remain in contact for a long time.

To remove the speaker grilles

HolesProjection

Speaker grille

40