JVC UX-G500V Setting the Clock INFO, To adjust the picture tone, To check the current clock time during playback

To adjust the picture tone

1Select “USER1” or “USER2.”

•Follow steps 1 and 2 explained in “To select a preset picture tone.”

2Select a parameter you want to adjust.

GAMMA	Adjust if the neutral color is bright or
	dark (–3 to +3).
BRIGHTNESS	Adjust if the entire picture is bright
	or dark (–8 to +8).
CONTRAST	Adjust if the brightness ratio is
	unnatural (–7 to +7).
SATURATION	Adjust if the picture is whitish or
	blackish (–7 to +7).
TINT	Adjust if the human skin color is
	unnatural (–7 to +7).
SHARPNESS	Adjust if the picture is indistinct
	(–8 to +8).

3Adjust the parameter.

4Repeat steps 2 and 3 to adjust other parameters.

To clear the screen, press VFP again while holding SHIFT.

Remote

Setting the Clock INFO ONLY

Without setting the built-in clock, you cannot use Daily Timers (see page 34).

•To exit the clock settings, press CLOCK/TIMER as required.

•To correct a mis-entry during the process, press CANCEL (while holding SHIFT). You can return to the previous step.

1Activate the clock setting mode.

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2Adjust the hour, then the minute.

Now the built-in clock starts working.

To check the current clock time during playback

Ex.: While playing a disc...

*Only while playing back a disc or USB mass storage class device.

**Only while playing back the following discs/files: DVD-VR:Program number/Play List number and chapter number.

MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX files: Group and file number.

DVD Video: Title and chapter number.

17