Daily Operations—Playback

In this manual, operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.

Remote control

Number buttons

1Turn on the power.

The STANDBY lamp on the main unit turns off.

•Instead of pressing AUDIO/TV, the System is turned on by pressing one of the source buttons.

2Select the source.

•Playback automatically starts if the selected source is ready.

•You can change the display information by pressing DISP/CHARA. For details, see page 17.

3Adjust the volume.To turn off (standby) the System

The STANDBY lamp on the main unit lights in red.

•A small amount of power is always consumed even while on standby.

For private listening

Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. “H-PHONE” appears on the display for a while. Be sure to turn down the volume before connecting or putting on the headphones.

•Disconnecting the headphones will activate the speakers again.

DO NOT turn off (standby) the System with the volume set at an extremely high level; otherwise, the sudden blast of sound may damage your hearing, speakers and/or headphones when you turn on the System or start playback.

8