Here are basic and common things that apply to all the
operations of UX-G6 system.
Turning On the Power and Selecting the
When you press a play button for example, like FM/AM,
CD 6 (play/pause), or TAPE 23 (playback), the system
automatically turns on and STANDBY/ON lamp lights
One Touch Play
If any CD or a tape, or last tuned station provided, the system
starts playing that source.
To select the external equipment as the source, press MD
6 (play/pause) or AUX button so that the system
automatically turns on.
•To turn on the system without playing, press button
so that STANDBY/ON lamp lights green.
•To turn off the system (standby mode), press again
button so that STANDBY/ON lamp lights red.
A little power is always consumed even while the system is
in standby mode.
•To save the power consumption, make use of Dimmer
feature (see page 10).
•To switch off the power supply completely, unplug the
AC power cord from the AC outlet. STANDBY/ON lamp
When you unplug the AC power cord
or if a power failure occurs
The clock is reset to “0:00” right away, while the
tuner preset stations will be erased in a few days.
Adjusting the Volume
You can adjust the volume level only while the system is
• Rotate VOLUME dial clockwise to increase the volume
level or counterclockwise to decrease it.
• Using VOLUME dial, rotating quickly makes a large
change in the volume level while rotating slowly makes
a step-by-step change.
MICRO COMPONENT SYSTEM UX-G6
MOS - FET
MULTI JOG VOLUME
REMOTE CONTROL RM-SUXG6E
CD 6 (play/pause)
TAPE ` (playback)
ACTIVE BASS EX.
EN01-13.UX-G6[A]/2 99.12.06, 17:4111