Two types of cassette tapes can be recorded onto, including
normal (Type I), and High position (Type II) tapes. These
types are identified automatically by the cassette deck unit
and the recording level is also corrected automatically.
Neither volume level nor sound effects during playback does
affect to the recording.
• It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Manual Recording onto a Tape
Select one of the recording sources — FM/AM
broadcasts, CD, or other external equipment.
• To record FM/AM broadcasts, receive a station with
• To record a CD or its tracks programed, set the play-
pause mode for CD unit.
• To record from an external equipment connected to
ANALOG IN jacks, prepare it as required.
Make sure to select a source first, otherwise you
cannot use recording function.
Place a recordable tape with the side you want to
record facing up.
Press 0 (open/close) button on the cassette deck unit to
open the tape tray; place a tape on it; and press 0 (open/
close) button again to close it.
• You cannot record onto the tape without a protect tab.
When using that tape, cover the hole for desired side
with adhesive tape.
Press REC PAUSE button on the cassette deck unit.
Recording onto a Tape
DOLBY B NR
REC PAUSE DOLBY B NR
π (auto reverse) 0 (open/close)
` (playback) 7 (stop)
Tape operations indicators
SET REC MODE
Buttons behind the sliding panel
TAPE ` (playback)
EN20-28.UX-G6[A]/2 99.12.14, 16:5222