You can tune in FM and AM stations manually,
automatically, and use the preset station feature.Setting the AM Tuner Interval Spacing
Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
When shipped, the built-in AM tuner is set to 9 kHz spacing.
•To set the frequency spacing — on the front panel only
Press FM/AM button first.
While pressing and holding 7 (stop) button on XT-UXG6,
press FM/AM button on AX-UXG6 repeatedly to select
“AM–9kHz” or “AM–10kHz” appeared alternately in the
Tuning in a Station
Press FM/AM button.
The system automatically turns on and tunes in the last
tuned station (either FM or AM). The following
information appears in the display window.
• Each time you press the button, the band alternates
between FM and AM.
• If a program on FM band is broadcast in stereo,
STEREO indicator lights.
Select a station using one of the following three
Opening the sliding panel, press 4 / ¢ (lower/
higher frequencies) button repeatedly to change the
frequencies step by step until you find the desired
Opening the sliding panel, press and hold 4 / ¢
(lower/higher frequencies) button for a second or more
to start searching a station and stop automatically until
the station of sufficient signal strength is tuned in.
•Preset Station Tuning
Rotate MULTI JOG dial clockwise to increase the
preset number or counterclockwise to decrease it
until the desired station is easily found.
Using the remote control:
UP/DOWN button on the remote control also has
the same function as MULTI JOG dial on the front
Listening to FM and AM Broadcasts
REMOTE CONTROL RM-SUXG6E
4 / ¢
4 ¢SET CANCEL
Buttons behind the sliding panel
MICRO COMPONENT SYSTEM UX-G6
MOS - FET
EN14-19.UX-G6[U]/4C 99.12.09, 15:3914