Connecting Other Equipment | JVC UX-H35 instruction

Continued

To remove the speaker grilles

The speaker grilles are removable.

Projections

Holes

Speaker grille

To remove the speaker grille, insert your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you.

To attach the speaker grille, follow the illustration

above.

Connecting Other Equipment

To connect an audio equipment

You can connect audio equipment—used only as a playback device.

•DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.

NOW you are ready to plug in the unit and any other connected equipment.

IMPORTANT: Be sure to check all connections to

be done before plugging the power cord.

This unit can be supplied with power through the AC IN connector (at home) or the DC IN connector (in a car).

•Do not connect the unit using the AC IN connector and the DC IN connector at the same time for safe and correct use.

To connect the AC power cord

			AC power cord (supplied)					AC IN

Connect the AC power cord to the AC IN connector and a wall outlet.

R

L

L

Audio equipment

To audio output	R

For playing other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied).

8

Image 11

JVC UX-H35 manual Connecting Other Equipment, To remove the speaker grilles, To connect an audio equipment

Contents

Micro Component System Page Important for Laser Products About This Manual PrecautionsIntroduction Contents Front view Location of the ButtonsMain Unit Top view Main unit Display window Display window Pressing one of these buttons also turns on the unit Remote Control FM antenna Supplied AccessoriesConnecting Antennas Getting Started To connect an outdoor AM antenna Connecting SpeakersTurn the AM loop antenna until you have the best reception Release your finger from the clamp To connect an audio equipment Connecting Other EquipmentTo connect the AC power cord To remove the speaker grilles When using the unit in your car Putting the Batteries into the Remote Control Common Operations Setting the Clock Reinforcing the Bass Sound Turning On the PowerAdjusting the Volume Adjusting the Tone Bass/Treble Listening to FM and AM Broadcasts Tuning in to a StationPresetting Stations Press SET again Tuning in to a Preset StationTune in to the station you want to preset Press SET General notes When playing a CD-R or CD-RWPlaying Back Discs Press 0 Open on the unit Programming the Playing Order of the Tracks-Program Play Basic Disc Operations Press Random To check the program contentsPlaying at Random-Random Play Repeating Tracks-Repeat Play Put a cassette in with the exposed part of the tape down Playing Back TapesPlaying Back a Tape Press for cassette deck on the unit To protect your recording To record on both sides-Reverse ModeRecording Recording on a Tape Repeat steps 2 and 3 to record other tracks you want Disc Direct RecordingOne Track Recording Press ONE Touch Set the off-time when you want the unit To turn off standby Using the TimersUsing Daily Timer and Recording Timer Set the on-time when you want the unit To turn on With the source to play Adjust the clock if you needSelect the volume level To deactivate the timer temporarily Press Sleep Using Snooze TimerUsing Sleep Timer How the Sleep Timer actually works Handling discs MaintenanceCleaning the unit Handling cassette tapes Specifications Troubleshooting 0403MWMMDWJEM