Manuals / JVC / Home Audio / Speaker System

JVC UX-H35 Getting Started, Supplied Accessories, Connecting Antennas, 2Extend the FM antenna

Models: UX-H35

1 28

Download 28 pages 42.87 Kb

Page 9

Image 9

Getting Started

Continued

Supplied Accessories

Make sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.

•AM loop antenna (1)

•FM antenna (1)

•AC power cord (1)

•Remote control (1)

•Batteries (2)

If anything is missing, consult your dealer immediately.

Connecting Antennas

FM antenna

FM antenna (supplied)

1Attach the FM antenna to the FM COAXIAL 75 Ω terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting the antenna, disconnect the supplied FM antenna.

Outdoor FM antenna

(not supplied)

Coaxial cable (not supplied)

A 75 Ω antenna with coaxial type connector

(IEC or DIN 45325) should be used.

Page 9

Image 9

JVC UX-H35 manual Getting Started, Supplied Accessories, Connecting Antennas, 2Extend the FM antenna

Contents

UX-H35-Consists of CA-UXH35and SP-UXH35 INSTRUCTIONSUX-H33-Consists of CA-UXH33and SP-UXH33 MICRO COMPONENT SYSTEMCAUTION-standby/on button Warnings, Cautions and OthersUX-H35 IMPORTANT FOR LASER PRODUCTSUX-H33 UX-H35/UX-H33Precautions IntroductionAbout This Manual Contents Main Unit Location of the ButtonsVOLUME TIMER/SNOOZEBASS REC ONSLEEP SNOOZE OFF CLOCKRemote Control Connecting Antennas Supplied AccessoriesGetting Started 2Extend the FM antenna2Insert the end of the speaker cord into Connecting Speakersthe terminal 3Release your finger from the clampTo connect the AC power cord Connecting Other EquipmentTo remove the speaker grilles To connect an audio equipmentWhen using the unit in your car Putting the Batteries into the Remote Control1 Press CLOCK/TIMER Setting the ClockCLOCK/TIMER 1Press TIMER/SNOOZEAdjusting the Volume Turning On the PowerAdjusting the Tone Bass/Treble Reinforcing the Bass SoundPresetting Stations Tuning in to a StationPRESET for more than Listening to FM and AM Broadcasts Continued1Tune in to the station you want to preset Tuning in to a Preset StationPress SET 4Press SET again1Press 0 OPEN on the unit Playing Back Discs2Place a disc correctly with its label side up 3Close the disc cover gently1Load a disc Basic Disc Operations2 Press PRGM program 3 Press UP orRepeating Tracks-RepeatPlay Playing at Random-RandomPlayPress RANDOM To check the program contentsPlaying Back a Tape Playing Back Tapes1Press for cassette deck on the unit Close the cassette holder cover gentlyRecording on a Tape RecordingOne Track Recording Disc Direct Recording2Load a disc 3 Press ONE TOUCHUsing Daily Timer and Recording Timer Using the Timers2Set the on-timewhen you want the unit 3Set the off-timewhen you want the unithave set the timer with the 6Adjust the clock if you need5Select the volume level with the source to playUsing Snooze Timer Using Sleep Timer1 Press SLEEP Cleaning the unit MaintenanceTo clean the disc To clean the heads, capstans, and pinch rollersSpecifications TroubleshootingSymptom Supplied Accessories0403MWMMDWJEM 2003 VICTOR COMPANY OF JAPAN, LIMITEDVICTOR COMPANY OF JAPAN, LIMITED