Using the Timers
There are three timers available – daily timer, recording timer and sleep timer.
Before using the timers, you need to set the
Using Daily Timer
With the daily timer, you can wake to your favorite music or radio program.
How the daily timer actually works
At the
The timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
8 Prepare the source and set the volume.
To listen to the radio, tune in the desired station. To listen to a CD, load the disc.
| TIMER |
9 Press TIMER ON/OFF SET | ON/OFF |
SET | |
(or TIMER on the remote |
|
control) to activate the timer. |
|
“
” lights up on the display.
10 Turn off the unit (on standby). |
|
|
/ON | ||
| STANDBY | |
When the preset time is reached, the selected source is played if the timer has been activated.
To deactivate the timer, press TIMER ON/OFF SET (or TIMER on the remote control).
“
” disappears from the display.
• The |
stopping times are the same. |
1Press and hold DISPLAY MODE until “
ON” starts blinking on the display, then
press PROGRAM.
The hour indication starts blinking.
2Press 4 or ¢ to set the timer start hour, then press
PROGRAM.
The minute indication starts blinking.
DISPLAY
MODE
PROGRAM
SEARCH/TUNING
• If the selected source (CD or TAPE) is not available when |
preset timer is reached, TUNER is selected automatically. |
Timer Recording
You can use the recording timer to record a preset radio station from a specified time and for a specified duration automatically.
1 Load a recordable tape into the tape deck.
Insert a tape with the open side down and the side to be
3Press 4 or ¢ to set the minute, then press
PROGRAM.
“
ON” starts blinking again.
4Press DISPLAY MODE so
that “
OFF” starts blinking on the display, then
press PROGRAM.
The hour indication starts blinking.
5Set the time to stop playback following the same procedure as steps 2 and 3.
6Press DISPLAY MODE so that “TUNER,” “TAPE,” “CD” or “REC TU” appears on the display, then press
PROGRAM.
7Press 4 or ¢ to select the desired source, then press PROGRAM.
SEARCH/TUNING
DISPLAY
MODE
PROGRAM
DISPLAY
MODE
PROGRAM
SEARCH/TUNING
recorded facing out from the unit.
2Follow the “Using Daily Timer” procedure on the left. Select “REC TU” as the source for timer recording.
•If the preset time is reached while the unit is on, the timer is not activated for timer recording.
•The recording timer is canceled once the recording is finished.
