For entering the password for logging into the unit.
(4) Unit Name (Within 32 letters)
For entering the name of the unit.
(5) Video CH [1 – 4]
Turning on the “Use” check box enables use of the corresponding video channel.
(6) Audio Monitor
The audio input to VN-E4 that the check box is turned on can be monitored and be recorded on
the PC side. Only one “Audio Monitor” is turned on among from Video CH1 to CH4.
(7) Send Audio
Turning on the check box, operating the “Send Audio” button on the viewer application becomes
possible. The audio input to PC can be transmitted to VN-E4 by operating the “Send Audio”
button, and it output it from the audio output terminal of VN-E4.
(8) Camera Name (Within 32 letters)
For setting the camera name. The entered name appears on the live image.
(9) Size
For specifying the image size to give priority to during display or recording.
(10) Motion Detection
To use the motion detection alarm, turn on the check box.
When the check box is turned on, the name of the motion detection alarm is automatically set to
“Camera Name” + “Motion Detection”. This name cannot be altered.
(11) Serial Terminal [1 – 2]
Turning on the “Use” check box enables use of the corresponding serial terminal.
(12) Unit [TK-C676/TK-C625/TK-C655]
For selecting the unit name connected with the serial terminal.
(13) Camera
For selecting the “Video CH” corresponding to the unit connected with the serial terminal.
(14) Alarm Terminal [1 – 4]
Turning on the “Use” check box enables use of the corresponding alarm terminal.
(15) Alarm Name (Within 32 letters)
For entering the name of the alarm. If the alarm name is left unspecified (blank) when the check
box in (12) is turned on, this is automatically set to “Camera Name” + “AL?” (“?” is the alarm
number).
(16) Trigger
For selecting the method for determining the alarm.
(17) Web Setting Button
For displaying the Web Setting screen of the unit.
14