* When setting is complete, click the “OK” button to close the “Unit Setting” screen.
* To change the settings of a registered unit, select the unit to alter from the unit list, followed by
clicking the “Modify” button.
* Screens and procedures when changing settings are similar to those for unit registration.
* To delete a registered unit, select the unit to delete from the unit list, followed by clicking the “Delete”
button.
2.3.1. VN-C20/C215 Unit Alarm Setting
* To use the alarm on VN-C20/C215, set the details in “External” – “Alarm” on the Web Settings screen
of VN-C20 according to the example below in addition to the VN-RS800 settings.
Example: Set No.01 to “Alarm Input 1”, No.02 to “Alarm Input 2”, and No.03 to “Motion Detection”.
* No.01
Action: UDP
1st Trigger: Input 1 Make/Break (select one)
TCP/UDP IP Address: IP address of PC on which VN-RS800 is running
TCP/UDP Port Number: 20000 (fixed)
TCP/UDP Data: Alarm1 (fixed data that shows "Alarm Input 1")
* No.02
Action: UDP
1st Trigger: Input 2 Make/Break (select one)
TCP/UDP IP Address: IP address of PC on which VN-RS800 is running
TCP/UDP Port Number: 20000 (fixed)
TCP/UDP Data: Alarm2 (fixed data that shows "Alarm Input 2")
* No.03
Action: UDP notification
1st Trigger: Motion
TCP/UDP IP Address: IP address of PC on which VN-RS800 is running
TCP/UDP Port Number: 20000 (fixed)
TCP/UDP Data: Motion (fixed data that shows "Motion Detection")
* Please change the setting of the firewall so that the above-mentioned alarm communication is not
blocked when you use the firewall on PC that operates VN-RS800.
17