Section 28.23.29 Video Surveillance Remote Devices and Sensors

1.03 ADMINISTRATIVE REQUIREMENTS

Specifier Note: Closed Circuit Television systems are often installed in multiple phases, similar to certain electrical components. It is important to schedule these phases in conjunction with construction phases. Improperly run wires or undesirable mounting locations may degrade system performance, and, may void the manufacturer’s warranty.

A.Coordination: Ensure Closed Circuit Television System installation is fully coordinated with provisions of Division 1, section 01 31 00 – Projec t Management and Coordination

B.Scheduling: Ensure pre-installation of cabling, mounting hardware and equipment installation is fully coordinated with Division 1, Section 01 32 00 – Construction Progress Documentation

1.Building envelop must be substantially completed and HVAC systems installed and operationally prior to final equipment installation

1.04SUBMITTALS

A.General: In compliance with Conditions of the Contract and Division 1, Section 01 33 00 Submittal Procedures

B.Product and technical data:

1.Manufacturers technical data sheets and bulletins

2.Manufacturers installation and operation manuals

3.Manufacturer Maintenance data

4.Spare parts list and recommended hardware a. Recommended maintenance contract

C.Shop Drawings:

1.Wiring diagrams

2.Equipment placement locations

3.Schedules and tables: Product quantity and placement

Specifier Note: When comparing/choosing digital video security equipment, many products may be derivatives of consumer electronics. The following language ensures the Owner the proper equipment is being used for the intended purpose.

1.05QUALITY ASSURANCE

A.The system shall be manufactured for the intended purpose in a commercial / industrial, 24 hour day, 7 days per week, and 365 days per year operating environment

B.Manufacturer Qualifications:

1.Obtain [products] [systems] from a manufacturer experienced in the engineering, production and support of closed circuit television systems, and, with sufficient production capability to meet the required project schedule

2.Manufacturer capable of providing field representation during design, installation and commissioning of systems

© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.

All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.

MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.

3 of 9

VN-X35U_v.2_1202

Page 3
Image 3
JVC VN-X35U specifications Administrative Requirements, Submittals, Quality Assurance