WB-S685U Ceiling Recessed Bracket (Not for USA and Canada) (continued)

Front side of camera

5.

Connect the cable.

5.

Cable

 

 

 

Connect the cable to the

 

 

terminal block of the

 

 

ceiling attachment fitting.

 

7.

6. Mount the ceiling attachment fitting on WB-S685U.

(3 locations)

CAUTION

Ensure that the cable is not caught in between during installation.

7. Install the fall prevention wire.
8. Mount the camera to the ceiling attachment fitting.

(For details, refer to the Instruction Manual of the camera.)

CAUTION

Before installing, configure the settings of the camera to be used.

The camera’s fixed-lock knobs cannot be locked.

When mounting the camera, make sure the camera’s fixed-lock knobs (2 locations) are protruded and that a click sound is heard.

After installation, check that the camera is securely installed using a penlight. The camera may fall off if the installation is not properly done.

6.

Screws (M4) (Accessory)

8.

Fall prevention wire of the camera

CAUTION

Ensure that the fall prevention wire is secured at the positions shown above.

Ceiling attachment fitting

Fall prevention wire

Check the fixed-lock knob position

Improper installation

Perfect installation

Hook

9. Install the ceiling panel.

Place and mount the ceiling panel (accessory) on the hooks (x2)

of WB-S685U.

CAUTION

Do not damage the dome cover when installing the ceiling panel.

9.

Ceiling panel

Dome cover

10