WB-S684U Outdoor Pendant Mount

Notes on Installation

●Consult your dealer on the installation location.

●We will not be responsible for any accidents that occur as a result of flawed installation.

●Pay due attention to the installation location and method.

●If the location is not strong enough, reinforce with a reinforcing board and check for safety before installing.

WB-S684U is an outdoor model.

WB-S684U is exclusively used for VN-V686WPU and TK-C686WPE (For Europe).

1.Remove the top cover from the camera unit.

ARemove the top cover fixing screws.

BRotate the top cover in anticlockwise

direction as shown on the right diagram. CLift up and remove the top cover.

Top cover

Camera unit

Top cover fixing screw

2. Remove the camera unit from the arm section.

Remove the connection fixing screws. (x3)

3. Pull out the cables and

fall prevention wire from the arm section.

CAUTION

Pull out the cables without damaging them.

4. Remove the fall prevention wire.

Remove the screws and the fall prevention wire that is mounted on camera unit.

Arm section

Connection

section2. fixing screws

Wrench (4 mm)

1.

Top cover

Top cover

Camera unit

3. 4.

Fall prevention wire

6