WB-S681U Pendant Mount

Notes on Installation

●Check that the installation location is able to withstand the total weight of the camera, which is about 3.7 kg, before you install. If the location is not strong enough, reinforce with a reinforcing board.

●Always use a wire rope to install.

●Screws to secure WB-S681U to the ceiling are not provided. Use the appropriate screws based on the materials, structure and total weight of the installation location.

●Conform to the local standards during the installation or construction.

1. Make a hole in the ceiling.

Front side of camera

2. Thread the cable and wire rope.

Bolts (M5~M6)

3. Shift the cover in the direction of the arrow (Q).

40 mm

1.

2.

Ceiling bracket

4.

6. Install the wire rope. (x1)

 

(For details, refer to the

 

 

 

 

Instruction Manual of the camera.)

Cover

 

 

 

7. Connect the cable.
4. Mount the ceiling bracket

5.

 

3.

on the ceiling. (4 locations)

 

 

 

Connect the cable to the

 

 

 

terminal block of the ceiling

 

 

 

 

 

 

 

 

attachment fitting.

5. Fix the cover back to its

 

 

 

(For details, refer to the

 

 

 

Instruction Manual of the camera.)

 

 

 

 

original position with the

 

 

 

8. Mount the ceiling
provided rivets. (x3)

 

 

 

 

 

 

attachment fitting on

 

 

 

 

 

 

 

 

WB-S681U using the

 

 

 

6.

provided screws.

 

 

7.

(3 locations)

 

 

Screw (M4)

 

 

 

rivet

 

 

 

9. Install the camera.

 

 

 

(For details, refer to the

 

 

 

 

 

 

 

Ceiling

Instruction Manual of the camera.)

Screws (M4)

 

 

attachment

 

 

fitting

 

(Accessory)

 

 

 

 

 

 

 

8.

Making a hole in the ceiling

Screw Location

x 4

85 (3- )

85 (3-)

Wire rope

6 mm below 6 mm

below 9 mm

4~5.5 mm

CAUTION

Always use the provided wire rope.

When a hole cannot be made in the ceiling

Fold in the direction of the arrow

4