WB-S684U Outdoor Pendant Mount (continued)
8. Install the fall prevention wire on WB-S684U.
A Thread the ring section of the fall prevention wire that was removed in step 4 through the
fall prevention wire hole of
B Thread the terminal side twice through the ring in A.
Thread twice
10.
Fall prevention wire
9. Install the fall prevention wire to the camera unit.
A Pull the terminal side that was threaded through the ring toward the direction of the camera unit.
B Install the fall prevention wire to the camera unit using
the fall prevention wire fixing screws that were removed in step 4.
Fall prevention 
wire fixing
screws
Fall prevention wire
10. Connect the cable.
Please refer to the Instruction Manual of
CAUTION
Be sure to bind both ends of unused cables individually with insulating tape.
11. Mount the camera unit.
Thread the cables through the arm section of
12. Mount the top cover.
Mount the top cover that was removed in step 1 using the fixing screw.
Connection section fixing screws
11.
8