WB-S685U Ceiling Recessed Bracket (Not for USA and Canada)
Notes on Installation
●Check that the installation location is able to withstand the total weight of the camera, which is about 2.9 kg, before you install. If the location is not strong enough, reinforce with a reinforcing board.
●The unit can be installed on ceilings of thickness up to 35 mm.
●Always use anchor bolts to secure
●Conform to the local standards during the installation or construction.
How to mount
Rotate the fixing screws (x3) in anticlockwise direction, shift the clamping brackets upwards as shown on the right diagram.
1. | Make a hole in the | Stopper | ||
2. | ||||
| ceiling. | |||
|
|
| ||
| Use the provided template. |
|
| |
|
|
|
| |
2. Use a stopper to temporarily secure WB-S685U on the ceiling.
3. Use anchor bolts to secure WB-S685U on the ceiling.
| Clamping | |
| brackets | |
| Fixing | |
| screws | |
Screw driver | Rotate in | |
anticlockwise | ||
| ||
| direction |
1.
200 mm
Ceiling
5 mm~35 mm
Anchor bolt |
| 3. | Front side of camera | |
Anchor bolt hole |
|
| <Top View> | |
|
| |||
(3/8 inch) |
|
|
| Hexagon nut |
|
|
| ||
|
|
|
|
|
4. Use the clamping brackets (x3) to secure on the ceiling.
Rotate the fixing screws (x3) in clockwise direction.
CAUTION
Clamping brackets
4. 
Clamping brackets
Make sure the clamping brackets are securely fastened.
Making a hole in the ceiling
Fixing screws
Rotate in clockwise direction
Screw driver
When anchor bolts cannot be used
To reinforcing anchor
Wire rope
CAUTION
Take note of the length, strength, pull and material of the wire rope to be used.
9