3 Selecting a track
If you want to listen to the selected disc from a desired track instead of the first track, select the track by one of the methods below.
•Method 1
Press the TRACK button, then use the DISC/TRACK jog dial on the front panel or the numeric buttons to select a track.
TRACK
TRACK
or
(Remote control)
DISC TRACK
DISC/TRACK
DOWN | UP |
or
(Remote control)
The selected track number is shown on the display.
•Method 2
Use the 4/¢ buttons to select a track.
Pressing the 4 button skips a track backward, while the ¢ button skips forward.
/ 
< CURSOR >
or
(Remote control)
NOTE: • The disc/track selection mode will be canceled if you do not use the jog dial or numeric buttons within 4 seconds after pressing the TRACK button.
•Also, the selected track will be canceled if you do not execute step 4 below within 4 seconds after us- ing the jog dial or numeric buttons.
• Skipping discs/tracks during playback
To skip discs or tracks during playback, the same basic methods as described in “2 Selecting a disc” on page 8 or “3 Selecting a track” on page 9 can be used.
After the selection is made,
•press the3/ 8button to start playback of the selected disc/track.
•the playback of the selected track automatically starts if you select a track in the current disc using the 4 / ¢ buttons.
NOTE: When “JOG” is shown in the display (= after pressing the DISC or TRACK buttons), pressing the 3/ 8 but- ton starts playback of the specified disc/track even during playback, instead of interrupting the current playback.
• Searching the track forward or backward
To search the track (to move fast forward or backward), hold down the 4 / ¢ button on the front panel or the 1 / Á button on the remote control.
• Stopping playback
Press the 7 button to stop playback.
STOP/CLEARPLAY/PAUSE
or
(Remote control)
Changing discs during playback
The carousel slots positioned in the front behind the disc storage door are accessible for loading, unloading, or changing discs while a disc is being played. Press the EXCHANGE button to open the door.
EXCHANGE
4 Starting the disc
Press the 3/8 button to play the selected disc or track.
STOP/CLEARPLAY/PAUSE
/ 
or
(Remote control)
• Interrupting playback
Press the 3/8button to temporarily interrupt playback, which can be resumed by pressing the 3/8 button again.
STOP/CLEARPLAY/PAUSE
/ 
or
(Remote control)
To close the door, press the EXCHANGE or OPEN/CLOSE button.
CAUTION
•Insert or remove discs very carefully at this time — the slots other than the center one are radially slanted toward the center of the carousel. Never try to rotate the carousel forcibly — it can- not be rotated when a disc is being played.
•Do not insert a disc outside of the loading area.
•To rotate the carousel, press OPEN/CLOSE button after clos- ing the disc storage door.
•After loading/unloading discs, promptly close the disc storage door. Playback will not occur while the door is in the open position.
9
