PROGRAM MODE PLAYBACK
Discs and tracks can be selectively specified in a program and played back according to the program in the PROGRAM mode.
The entire program can be played back repeatedly (REPEAT function) or one program step can be selected and played back repeatedly (REPEAT 1 function).
Reviewing the steps:
Pressing the CALL button displays the step in the programmed order.
Deleting a step:
Press the CALL button as many times as required to display a step to be deleted. Then press the CANCEL button.
Basic mode
1.Select the mode. <By the unit>
Press the PLAY MODE button as many times as required until “PROGRAM” is shown on the display.
<By the remote control> Press the PROGRAM button.
PLAY MODE | PROGRAM |
or
(Remote control)
2.Specify discs and tracks in the order you want to listen to by the following procedures.
(a)Select a disc and a track using the DISC/TRACK jog dial on the front panel or the numeric buttons on the remote control.
See “2 Selecting a disc, Method 1” on page 8 and “3 Selecting a track, Method 1” on page 9 about how to select the disc and track.
If you want to program a whole disc to be played back, omit specifying the track.
(b)Press the ENTER button to register the specification as program step 1.
ENTER | ENTER |
or
(Remote control)
(c)Repeat (a) and (b) above.
Up to 32 steps can be programmed.
Adding a step:
An added step is placed in the last step automatically.
Deleting all steps:
Press the 7(STOP/CLEAR) button on the front panel or the CLEAR button on the remote control. The entire program will be cleared.
3. Press the 3/8button to start playback according to the program.
STOP/CLEARPLAY/PAUSE
/ 
or
(Remote control)
The program reviewing and modification procedures described above can be performed when playback is stopped.
The program will be retained and available whenever the PROGRAM mode is selected again as long as the unit is kept in the standby state.
If the AC power cord is disconnected from the outlet, the program will be erased.
Playing back the program repeatedly
To play back a program repeatedly, press the REPEAT button to show “REPEAT” on the display, and then press the 3/8 button.
REPEAT | REPEAT |
or
(Remote control)
To cancel the function, press the REPEAT button two more times, clearing the indication from the display.
12
