JVC XL-MC334BK Precautions, Setting Up, Installation, Compact discs, Operation, Moving the unit

PRECAUTIONS

Installation

•Select the best location

Select a level location to install this unit, where it is free from extremes of temperature (5 to 35°C, or 41 to 95°F) and humidity,

dust, or vibration.

If noise interference is caused when receiving AM broadcast by a tuner/receiver located nearby, relocate it or this unit, or turn off either one.

•Moving the unit

Before moving the unit, first remove all discs. Turn the power off, making sure the standby indicator is on. Then remove the AC power cord from the AC outlet.

Compact discs

• Use only compact digital audio discs

Only audio compact discs identified by the	'
logo on the right can be played back with the
unit.
Also the unit can display the text information
in CD text discs identified by the logo on the
right.

Operation

•Place only discs in the disc storage

Do not put anything other than discs in slots of the disc storage.

•Turn the power off if a problem occurs

If an unusual condition arises, turn the power off immediately. If the condition persists whenever the power is turned on, consult your JVC dealer.

•Do not pull the AC cord

Do not pull the cable when unplugging the AC cord from the AC outlet or this component — hold and pull the plug body.

•Set the sound volume carefully

Be careful in setting the sound volume on your amplifier/receiver when playing a CD, which has almost no background noise unlike analog records and tapes. Find the right setting by starting with a low level setting. Setting the level too high and then playing a CD could damage the speakers.

•Protect the unit against condensation

Condensation on the unit could disrupt the proper transmission of the disc-reading laser beam, causing noise or malfunction. If condensation occurs due to excessive humidity or sudden temperature change, leave the unit turned on for a couple of hours to dry — consult your JVC dealer if this does not correct the condition.

SETTING UP

Connecting the unit

This compact disc changer/player needs to be connected to an amplifier/receiver for audio reproduction.

CAUTION

Do not connect the AC power cord until all other neces- sary connections have been made.

1. Audio connection

Connect the analog (OUTPUT) ports on the back of this unit with the CD or AUX input ports of the amplifier/receiver using the supplied audio cords (red and white).

Audio cord	OUTPUT	COMPULINK-3	TEXT	DIGITAL
		(SYNCHRO)	COMPULINK	(OPTICAL)
(White)	LEFT
(Red)	RIGHT

To input audio jack of the amplifier/receiver

•Be sure to insert the plug firmly into the proper ports.

•Be sure to match the output and input channels—RIGHT to RIGHT and LEFT to LEFT.

If your audio unit has a digital optical input, you may connect the DIGITAL (OPTICAL) port on the back of this unit to it using the optional digital cord.

OUTPUT	COMPULINK-3	TEXT	DIGITAL
	(SYNCHRO)	COMPULINK	(OPTICAL)
LEFT			To Digital jack
RIGHT
			Digital cord

2. COMPU LINK-3 connection

If you are using a JVC audio amplifier/receiver supporting the COMPU LINK-3 remote control system, connect either one of the COMPU LINK-3 (SYNCHRO) ports on the back of the unit with the amplifier/receiver’s COMPU LINK-3 port using the supplied compulink cord (black).

COMPU LINK cord

OUTPUT	COMPULINK-3	TEXT	DIGITAL	(Black)
	(SYNCHRO)	COMPULINK	(OPTICAL)

LEFT

RIGHT

To COMPU LINK jack

By using the COMPU LINK-3 system, you can control the unit from the connected JVC amplifier/receiver.

(See “COMPU LINK-3 REMOTE CONTROL SYSTEM” on page 21.)

2