Installation and Setup
HDMI connection
If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable.
1.Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H).
2.Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Notes:
You must select a HDMI audio output and a maximum sampling frequency that your TV accepts using [HDMI] and [Sampling Freq.] options on the setup menu (see page 20).
If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.
Tips:
•When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.)
•Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 19).
Cautions
Changing the resolution when the connection has already been established may result in malfunc- tions. To solve the problem, turn off the player and then turn it on again.
When the HDMI connection with HDCP is not veri- fied, TV screen is changed to black screen. In this case, check the the HDMI connection, or discon- nect the HDMI cable.
If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 15ft).
HDMI compatible TV
HDMI
H
Rear of the player
Additional Information for HDMI
When you connect a HDMI or DVI compatible device make sure of the following:
-Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
-The connected device’s video input is set cor- rectly for this unit.
-The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.
Not all
-The picture will not be displayed properly with
-This player does not playback and TV screen is changed to black screen.
Installation and Setup
13
