15
Installation and
Setup
Connecting to an Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
Note:
Since many factors affect the type of audio output,
see “The unit’s Audio Output Specifications” on page
36 for details.

Connecting to an Amplifier via 2 Channel

Audio Output

Connect the Left and Right 2CH AUDIO OUTjacks
on the player to the audio left and right in jacks on
your amplifier, receiver, or stereo system, using
audio cables (A).

Connecting to an Amplifier via Digital Audio

Output (Optical or Coaxial)

1. Connect the player’s DIGITALAUDIO OUT jack
to the corresponding in jack (OPTICALOor
COAXIALX) on your amplifier. Use an optional
digital (optical Oor coaxial X) audio cable.
2. You will need to activate the player’s digital out-
put. (See “[AUDIO] Menu” on pages 20.)

Connecting to an Amplifier via HDMI Output

1. Connect the player’s HDMI OUT jack to the cor-
responding in jack on your amplifier. Use an
HDMI cable (H1).
2. You will need to activate the player’s digital out-
put. (See “[AUDIO] Menu” on pages 20.)
Tip:
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using an HDMI cable (H2) if
your amplifier has HDMI output jack.

Digital Multi-channel sound

Adigital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video Receiver that supports one or more of
the audio formats supported by your player. Check
the receiver manual and the logos on the front of the
receiver. (PCM Stereo, PCM Multi-Ch, Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and/or
DTS-HD)
Notes:
You must select a digital audio output and a max-
imum sampling frequency that your Amplifier (or
AV receiver) accepts using [SPDIF], [HDMI] and
[Sampling Freq.] options on the [Setup] menu
(see page 20).
With digital audio connection (SPDIF or HDMI),
Disc Menu button sounds of BD-ROM may not be
heard if the [SPDIF] or [HDMI] option is set to
[Primary Pass-Thru].
If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
To see the audio format of the current disc in the
on-screen display, press AUDIO.
R
L
AUDIO INPUT DIGITAL INPUT
OPTICAL
HDMI INPUT
HDMI OUTPUT
Amplifier (Receiver)
Rear of the player
A O H1
H2
HDMI
HDMI compatible TV
DIGITAL INPUT
COAXIAL
X
BD310-JN_BUSAJJK_OM_ENG 2/27/09 4:58 PM Page 15