3.9
3 • Assembling and Hanging the Fan (continued)
3.10
Optional Pipe/Ball Instructions: | Optional Pipe/Ball Instructions: |
Remove the screw and ground wire from the pipe.
Reassemble the ground wire, wedge, pin, ball, and pipe ball screw, in that order, onto the long pipe/ball assembly. Go back to Step 3.2.
44 •• Setting tthe Remote Transsmitter aand Receiver
When two or more fans are located near each other, you may want to have the receiver/transmitter for each fan set to
a diff erent code, so 4.1 that the operation
of one fan does not affect the operation of the other fans.
86
87
IMPORTANT! Before you change the DIP switch settings, make sure the battery is not connected to the transmitter.
The DIP switches for the receiver (86) are located on the flat surface of the receiver. The DIP switches for the transmitter (87) are in the battery compartment.
9
