3.1
3 • Assembling and Hanging the Fan | ||
| CAUTION: | 7 |
| The motor cover | |
| adapter has a |
|
| special coating |
|
7 | on the threads. | 3 |
Do not remove | ||
| this coating; the |
|
| coating prevents |
|
| the pipe/ball | 3.2 |
| assembly from | |
3 | unscrewing. Once | |
assembled, do not | 4 | |
| remove the pipe/ |
|
| ball assembly. | 8 |
4 |
| |
| 79 | |
Insert the pipe/ball assembly (7) through the ceiling mounting plate cover
(3)and ceiling mounting plate cover trim ring (4). Feed the wires from the fan through the pipe/ball assembly (7).
Using the provided Allen wrench (79), loosen the setscrew (8) on the motor cover adapter to install the pipe and ball assembly (7). When the pipe and ball assembly (7)is fully installed,
8 |
79 |
3.3 |
Use the Allen wrench (79) to securely retighten the setscrew (8).
7
2
3.4
3
Raise the fan and align the slots in the ceiling mounting plate cover (3) with the hooks on the ceiling mounting plate (2). Note: To hang the fan, you must tilt the ceiling mounting plate cover (3) to an almost vertical position so that the ceiling mounting plate cover (3) slots sit on the ceiling mounting plate hooks.
