6 • Installing the Ceiling Plate Cover
3
6.1
Tab
7
Groove
Rotate the pipe/ball assembly (7) so the tab in the ceiling mounting plate cover (3) is secure in the hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned.
62
6.3 | 3 |
|
2
6.2 | 3 |
|
Swing the fan up to align the ceiling mounting plate cover screw holes with the mounting holes on the ceiling mounting plate(2).
6.4 | 3 |
|
Holding the ceiling mounting plate cover (3) up with the screw holes aligned, partially install two ceiling mounting plate cover screws (62) into
the holes opposite the ceiling mounting plate tabs.
Partially install a ceiling mounting plate cover screw (62) between the slots in the ceiling mounting plate cover (3). When all the holes are properly aligned, securely tighten all three ceiling mounting plate cover screws. Verify that the tabs in the ceiling mounting plate cover are still in the grooves of the hanger ball.
13