JVC XV-BP11, XV-BP10 manual Compatibility Notes, Certain System Requirements, Language setting

BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 9

Compatibility Notes

Because BD-ROM are a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility prob- lems, please contact an authorized Customer Service Center.

Viewing high-definition content and up-converting standard DVD content may require an HDMI- capable input or HDCP-capable DVI input on your display device.

Some BD-ROM and DVD discs may restrict the use of some operation commands or features.

Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maximum 7.1 channels if you use HDMI connection for the audio output of the unit.

You can use a USB Flash Drive that is used to store some disc related information, including downloaded on-line content. The disc you are using will control how long this information is retained.

Certain System Requirements

For high definition video playback:

High definition display that has HDMI input jack.

BD-ROM disc with high definition content.

HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors).

For up-conversion of standard definition DVD, an HDMI or HDCP capable DVI input on your display device is required for copy protected content.

For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio playback:

An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD) decoder.

Main, center, surround speakers and subwoofer as necessary for chosen format.

Language setting

When turned on for the first time, select a language for the [Setup] menu and on-screen display.

1.Press HOME and the [Home Menu] appears.

2.Select [Setup] and press ENTER. The Setup menu appears.

3.Use v / V to select [LANGUAGE] option then press B.

4.Use v / V to select [Display Menu] option then press B.

5.Use v / V to select the desired language then press ENTER.

6.Press RETURN or HOME to exit the Setup menu.

Resetting the Player

If you observe any of the following symptoms...

When the Player is plugged in, but the power will not turn on or off.

When the display window is not working. When the Player does not operate normally.

You can reset the Player as follows:

Press and hold the STANDBY/ON button for more than five seconds. This will force the Player to power off. Press the STANDBY/ON button again to turn the Player back on.

Unplug the power cord and then plug the power cord again after more than five seconds.

Introduction

9