JVC XV-S320SL manual Rear panel, Video OUT jack 16 Outputs a S-video signal, AC in connector

Rear panel

For XV-S400BK

1 2

Preliminary knowledge

English

DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT
COAXIAL	Y	PB	PR
OPTICAL
S-VIDEO	VIDEO RIGHT		LEFT
		AUDIO OUT

VIDEO OUT SELECT

S-VIDEO COMPONENT

AND AND

VIDEO VIDEO

AV COMPU LINK

1

AC IN

3 4 5

6

7 8 9

1DIGITAL OUT jack (OPTICAL/COAXIAL) (18) Outputs digital audio signals. Both coaxical and optical connectors are provided. You must select the signal type correctly according to the external device connected to via the Preference display.

2COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.

To enable these jacks, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “COMPONENT AND VIDEO”.

3S-VIDEO OUT jack (16) Outputs a S-video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

4VIDEO OUT jack (16)

Outputs a composite video signal.

This jack is enabled regardless of VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch position.

5AUDIO OUT jacks (LEFT/RIGHT) (16, 17) Outputs stereo analog audio signals.

6VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16) Select “COMPONENT AND VIDEO” or “S-VIDEO AND VIDEO”.

Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed setting will not be effective.

7AV COMPU LINK jacks (52)

Connects with other JVC equipment supporting the AV Compulink function to facilitate integrated operations.

8 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

9Region Code label (15) Shows Region Code number.

Preliminary knowledge

For XV-S300BK/XV-S302SL

1	2
DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT
	Y	PB	PR
COAXIAL
S-VIDEO	VIDEO RIGHT		LEFT

AUDIO OUT

VIDEO OUT SELECT

S-VIDEO COMPONENT AND

VIDEO

1

AC IN

3 4 5 6 7 8

1DIGITAL OUT jack (COAXIAL) (18)

Outputs digital audio signals. You must select the type correctly according to the external device connected to via the Preference display.

2COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.

To enable these jacks, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “COMPONENT”.

3S-VIDEO OUT jack (16) Outputs a S-video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

4VIDEO OUT jack (16)

Outputs a composite video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

5AUDIO OUT jacks (LEFT/RIGHT) (16, 17) Outputs stereo analog audio signals.

6VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16) Select “COMPONENT or “S-VIDEO AND VIDEO”.

Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed setting will not be effective.

7 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

8Region Code label (15) Shows Region Code number.

11