JVC XV-S403SG, XV-S402SL manual Rear panel

Outputs stereo analog audio signals.

5 AUDIO OUT jacks (LEFT/RIGHT) (16, 17)

6 VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16) Select “COMPONENT” or “S-VIDEO AND VIDEO”.

Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD removed.

Otherwise, the changed setting will not be effective.

7 VIDEO OUT SELECT switch (NTSC/PAL) (16) Select “NTSC” or “PAL” to match the color system of your TV.

Note that you must change the switch position while the unit power is off (on standby).

Otherwise, the changed setting will not be effective.

8 AV COMPU LINK jacks (52)

These jacks are provided for use in the future. They are currently not used.

Rear panel

For XV-S402SL/XV-S403SG

1 2

Preliminary knowledge

English

DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT
COAXIAL	Y	PB	PR
OPTICAL

S-VIDEO VIDEO RIGHT LEFT

AUDIO OUT

VIDEO OUT SELECT

S-VIDEO COMPONENT

AND AND

VIDEO VIDEO NTSC PAL

AV COMPU LINK

2

AC IN

3 4 5 6 7 8 9 0

1 DIGITAL OUT jack (OPTICAL/COAXIAL) (18)

Outputs digital audio signals. Both coaxical and optical connectors are provided. You must select the signal type correctly according to the external device connected to via the Preference display.

2COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.

To enable these jacks, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “COMPONENT AND VIDEO”.

3S-VIDEO OUT jack (16) Outputs a S-video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

4VIDEO OUT jack (16)

Outputs a composite video signal.

This jack is enabled regardless of VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch position.

5AUDIO OUT jacks (LEFT/RIGHT) (16, 17) Outputs stereo analog audio signals.

6VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16) Select “COMPONENT AND VIDEO” or “S-VIDEO AND VIDEO”. Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD removed.

Otherwise, the changed setting will not be effective.

7VIDEO OUT SELECT switch (NTSC/PAL) (16) Select “NTSC” or “PAL” to match the color system of your TV.

Note that you must change the switch position while the unit power is off (on standby).

Otherwise, the changed setting will not be effective.

8AV COMPU LINK jacks (52)

Connects with other JVC equipment supporting the AV Compulink function to facilitate integrated operations.

9 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

0 Region Code label (15) Shows Region Code number.

Preliminary knowledge

For XV-S332SL

1 2

DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT
	Y	PB	PR

COAXIAL

S-VIDEO VIDEO RIGHT LEFT

AUDIO OUT

VIDEO OUT SELECT

S-VIDEO COMPONENT AND

VIDEO

NTSC PAL

AV COMPU LINK

2

AC IN

3 4 5 6 7 8 9 0

1 DIGITAL OUT jack (COAXIAL) (18)

Outputs digital audio signals. You must select the type correctly according to the external device connected to via the Preference display.

2 COMPONENT VIDEO OUT jacks (Y/PB/PR) (17)

Output component video signals.

To enable these jacks, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “COMPONENT”.

3 S-VIDEO OUT jack (16)

Outputs a S-video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

4 VIDEO OUT jack (16)

Outputs a composite video signal.

To enable this jack, select VIDEO OUT SELECT

(COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”. 9 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

0 Region Code label (15) Shows Region Code number.

11