Operating external components with the remote control

The buttons described below are used on pages 14 and 15.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 1, then 0.

For a Toshiba TV:

Press 0, then 8.

TV VIDEO

TV VCR/DBS

 

VCR

 

DBS

TV VOL

CHANNEL

TV

Remote control mode selector

Manufacturer

Code

Manufacturer

Code

JVC

01

Samsung

12

 

 

 

 

Hitachi

10

Sharp

06

 

 

 

 

Magnavox

02

Sony

07

 

 

 

 

Mitsubishi

03

Toshiba

08

VCR/DBS

(play button)

ENTER

REC

Number buttons

TV RETURN

100+

NOTE

•Manufacturers’ codes are subject to change without notice.

•Set the codes again after replacing the batteries of the remote control.

Panasonic

04, 11 Zenith

09

RCA

05

 

5 Release F TV.

If there is more than one code listed for corresponding brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

The following buttons are available:

FTV:Turns TV on and off.

TV VOL +/–:

Adjusts the volume.

TV/VIDEO:

Selects the input mode (either TV or

 

VIDEO).

CHANNEL +/–:

Changes the channels.

1-10, 0, +10 (100+): Selects the channel.

TV RETURN:

Alternates between the previously selected

 

channel and the current channel.

Operating the TV7To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector to TV.2 Press and hold F TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.
Operating the DBS tuner or CATV converter

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR/DBS.2 Press DBS.3 Press and hold F VCR/DBS.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

Continued on next page

14