Jwin JT-P551 instruction manual Troubleshooting & Specifications, Important Note

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

TROUBLESHOOTING & SPECIFICATIONS

Troubleshooting

•No Display on LCD Screen

o Brightness on display may be turned down.

ƒIncrease brightness level.

oNo batteries or batteries are improperly installed.

ƒIf no batteries, install 2 AA batteries as directed or

ƒInstall optional AC Adapter (not included).

ƒMake sure batteries observe to polarities (+/-) as indicated inside the battery compartment.

•No Dial Tone when handset is picked up

oPhone may not be connected properly.

ƒMake sure the handset jack is connected to the base jack using the colied wire.

ƒMake sure the base jack (TEL-LINE) jack is connected to the wall telephone jack using the flat wire.

oTelephone service may be interrupted by the telephone company

ƒContact your telephone company to check the status of your service.

•Static or interruptions during phone conversation

oBad connection between phones

ƒHang up and dial number again.

oHarsh weather conditions and/or lightning

ƒHang up and dial number when weather conditions improve.

•Can only receive incoming calls and cannot make outgoing calls

oTelephone service may be limited or suspended by your telephone company

ƒContact your telephone company to check the status of your service.

Important Note:

To operate this unit, you must have “CALLER ID SERVICE” setup with your local telephone company. Some functions such as CALLER NAME INDICATION will only operate if such service is included in the user’s Caller I.D. program with the local telephone company.

Specifications

•Power Requirement

oBattery: 6V (4 x “AA” batteries, not included)

oAC Adapter: DC 9V, 300mA, center negative (AC adapter not included)

•Unit Weight: Approx. 1.4 lbs (0.640kg)

- 22 - www.jWIN.com