7.Function Buttons
7.1 Function Buttons on the Front Panel
This section instructs you the basics on how to operate the player.
After connection, you must make the following preparations before operation of this player.
*Turn on the TV and select Video Input.
*Connect the power wires of the player to the socket. (the functions list below also corresponds to the button functions of the remote control)
7.1.1 Power
Press the button to switch the unit ON/OFF.(the button is located at the rear panel)
7.1.2 Standby
Press the button for the first time and the player will be in standby state and reduce the power consumption. Press this button again and the player will recover operation.
7.1.3 Play
Press the button to close the disc tray and start playback.
7.1.4 PAUSE
Press the PAUSE button to pause playback(still mode).
But on the remote control ,you press the button once,the player will be in pause state; you press the button twice, the picture will advances frame by frame. To resume normal playback, press the PLAY button.
16
