7.2Function Buttons on the Remote Control

7.2.1 PS

The PS button allows you to change between PROGRESSIVE or INTERLACE(ordinary TV) modes.

(Always put the player in the INTERLACE mode when using an ordinary TV set not capable of accepting the Progressive Scan video signal. Otherwise ,there will be no display on TV and may cause damage to your TV.)

7.2.2 Recall

Pressing the button will return all settings back to the factory default setting.

7.2.3 OSD

Press the button to display the information of the disc during playback..

7.2.4 MUTE

During playback, the MUTE button is used to activate the mute function. It turns off the playback sound immediately. To resume normal sound level, press the MUTE button again.

7.2.5 Numeric Keys (0-9, +10)

During playback you can locate a title by entering the title number or locate a specific chapter or track directly in combination with the SEARCH button.

7.2.6 Clear

When you input numbers from NUMERIC KEYS, you can press CLEAR button to clear the numbers entered.

19

Page 36
Image 36
Jwin JX-DVD400 manual Function Buttons on the Remote Control